4 Channel LVPECL Terminator

SKU:

$ 1,148.85

Item	Description
88000102-4	Cable, triple voltage, with modular plugs, Length in ft.
88000103-4	Cable, triple voltage, with modular plug and pig tail leads, Length in ft.

Product Description
Diagrams
Applications
Specifications
Documents

Applications:

Replacement for discontinued HP/Agilent/Keysight 10086A ECL Terminator
Allow direct connection of LVPECL signals to 50 Ω input instruments
Provide standard 50 Ω/V_TT terminations for LVPECL signals and Ground Referenced Outputs
Testing and monitoring GHz LVPECL signals in digital and wireless communication applications
Monitoring of optical transceiver outputs

Features:

43 ps Typical Rise Time (8 GHz equivalent bandwidth)
50 Ω/+1.3 V Input Termination for LVPECL
Ground Referenced Outputs protect sensitive instruments
SMA I/O connectors
12 dB (4X) attenuation
Self-contained 1.3 x 2.9 x 2.2-in. unit includes AC/DC Adapter

Description

INTRODUCTION

LVPECL logic levels are offset from ground. Without proper level shifting, these logic signals can not be connected to ground-referenced 50 Ω input instruments, such as sampling 'scopes, network analyzers, scanners and counters, etc. Otherwise, either the LVPECL equipment outputs or the measurement instrument inputs may be made inoperative or damaged.

When driving a length of 50 Ω coaxial cable, an LVPECL output must be terminated into a 50 Ω load that is connected to a terminating voltage V_TT = V_CC -2 V. For LVPECL circuits, where the supply voltage is +3.3 V, V_TT is +1.3 V

LVPECL Terminators are level translators which convert LVPECL signals into signals that can be connected to ground referenced 50 Ω input instruments and, at the same time, provide standard 50 Ω/V_TT terminations required by LVPECL signals.

PRODUCT DESCRIPTION

The PRL-550LPQ4X is a Four Channel LVPECL Terminator designed to interface with LVPECL circuits operating with a +3.3 V supply. Each input has an equivalent 50 Ω resistor terminated to a voltage V_TT = +1.3 V. The outputs of these Terminators are designed for direct connection to ground-referenced 50 Ω input instruments as shown in Fig. 1, and the block diagram for the instrument is shown in Fig. 2. These near-ground level output signals* protect sensitive instruments and enhance measurement accuracy when these instruments are used.

Once an LVPECL signal is translated through a proper Terminator, it can be routed through 50 Ω scanners and other high frequency measuring instruments for processing. Each PRL-550LPQ4X Terminator is housed in an attractive 1.3 x 2.9 x 2.2-in. extruded aluminum enclosure and is supplied with a ±8.5 V AC/DC Adapter.

Fig. 1: LVPECL driving a 50 Ω input instrument using the PRL-550LPQ4X Terminator

Fig. 2, PRL-550LPQ4X Diagram

(0° C ≤ T_A ≤ 35° C)*

Symbol	Parameter	PRL-550LPQ4X			Unit
Symbol	Parameter	Min	Typ	Max	Unit
R_IN	Input Resistance	49.5	50.0	50.5	Ω
V_TT	Input Termination Voltage	1.23	1.30	1.36	V
V_OS	Output Offset Voltage*	-100	0	100	mV
	Signal Attenuation	11.8	12.0	12.2	dB
I_DC1	DC Input Current, +8.5 V		+80	+120	mA
I_DC2	DC Input Current, -8.5 V		-125	-150	mA
V_DC	DC Input Voltage	±7.5	±8.5	±12	V
V_AC1	AC/DC Adapter Input Voltage, 120 V	103	115	127	V
t_PLH	Propagation Delay to output ↑		475	575	ps
t_PHL	Propagation Delay to output ↓		475	575	ps
t_r/t_f	Rise/Fall Time		43	61	ps
BW	Equivalent bandwidth	5.7	8.0		GHz
t_SKEW	Skew between outputs		20	50	ps
	Channel-to-Channel Cross Talk @ 1.4 GHz		34	38	dB
	Size	1.3 x 2.9 x 2.2			in.
	Weight, excluding AC adapter	5			Oz
	Shipping weight, including AC adapter	4			lb.

*The output offset and input termination voltages are factory set to 0 V and V_TT = V_CC-2 V, respectively, before the input is connected to an LVPECL device. When connected to an LVPECL device, the output low level will be slightly offset from ground depending on the low level output voltage of the connected device, which is typically V_CC-1.8 V. When its input is connected to an LVPECL device, the Terminator output Low level is typically +50 mV.