1:2 RF Splitter, +6 dB, Inverting, SMA I/Os

SKU:

$ 667.00

Item	Description
88000102-4	Cable, triple voltage, with modular plugs, Length in ft.
88000103-4	Cable, triple voltage, with modular plug and pig tail leads, Length in ft.

Product Description
Diagrams
Applications
Specifications
Documents

Applications:

1:2 RF signal Fanout
Transmission Line Drivers
Single-Ended to Differential Signal Conversion (6 dB passive power divider recommended)
RF Receivers
Pulse Amplifiers
General Purpose Wideband Amplifiers

Features:

Ready to Use Amplifiers each with Two Identical Outputs
Small Signal 3dB BW to 350 MHz
Clean Pulse Response
6 dB gain, V_O = 2 V_IN (R_L = 50 Ω), Well Suited for Single-ended Input to Differential Output Conversion with the addition of a 6 dB passive power divider.
±1.25 V, 2.5 V_PP, Maximum Outputs, R_L = 50 Ω
DC Coupled 50 Ω I/Os
±45 mA Supply Current Maximum
1.0 x 1.3 x 2.2-in. Module includes ±8.5 V AC/DC adapter

Description

The PRL-302I-6dB is a DC-coupled inverting, 6 dB 1:2 RF splitter amplifier. Each amplifier has two identical 50 Ω back-terminated outputs and a 50 Ω-to-ground terminated input. One pair of these amplifiers (one inverting, one non-inverting) can produce two pairs of complementary RF signals (180° out of phase) when driven by a single input using a 6 dB passive power divider.

These splitter amplifiers have been optimized both for pulse response and for CW response, so that output overshoots and ringing for a fast pulse input are much smaller than those from amplifiers designed mainly for CW applications. With a 50 Ω back termination at each output, these amplifiers can drive long transmission lines with or without load terminations. For optimum output response both outputs should be terminated into 50 Ω.

Each amplifier is housed in a 1.0 x 1.3 x 2.2-in. aluminum enclosure and is supplied with a ±8.5 V AC/DC adapter. Besides the I/O and power connections, no other set up or connection is required. These amplifiers are part of the PRL family of Mini Modular Instruments (MMIs).

Fig. 1: PRL-302I-6dB Top Cover Decal

(0° C ≤ T_A ≤ 35° C)*

Symbol	Parameter	PRL-302I-6dB			Unit	Comments
Symbol	Parameter	Min	Typ	Max	Unit	Comments
R_IN	Input Resistance	49.5	50.0	50.5	Ω
R_OUT	Output Resistance	49.5	50.0	50.5	Ω
A_O	Open Circuit Voltage Gain		-4		x	R_L=1 MΩ
A_L	Loaded Voltage Gain	-2.06	-2.00	-1.94	x	R_L=50 Ω
A_dB	Voltage Gain in dB	5.75	6.00	6.25	dB
V_OPP1	Max. Output, one output only	±1.1	±1.25		V
V_OPP2	Max. Output, both outputs	±0.8	±1.0		V
I_DC1	DC Input Current (NL)		±20		mA
I_DC2	DC Input Current (V_O = ±1.25V)		±40	±50	mA
V_DC	DC Input Voltage	±7.5	±8.5	±12	V
V_AC	AC/DC Adapter Input Voltage	103	115	127	V
t_PLH	Propagation Delay to output ↑		1.5		ns
t_PHL	Propagation Delay to output ↓		1.5		ns
t_r/t_f1	Small Signal Rise/Fall Times⁽¹⁾		1.0/1.0	1.1/1.1	ns	(10%-90%)
BW1	Small Signal 3 dB BW⁽¹⁾	318	350		MHz
t_r/t_f2	Large Signal Rise/Fall Times⁽¹⁾		1.5/1.5	1.7/1.7	ns	(10%-90%)
BW2	Large Signal 3 dB BW⁽¹⁾	206	233		MHz
t_SKEW	Skew between outputs		20	50	ps
	Size	1.0 x 1.3 x 2.2			in
	Weight	4			Oz	w/o AC adapter
	Shipping Weight	4			lb	w/AC adapter

Notes:

*Unless otherwise specified, dynamic measurements are made with all outputs terminated into 50 Ω .

(1) V_O = ±0.4 V (0.8 V_P-P) for small signal response, and V_O = ±1.25 V (2.5 V_P-P) for large signal response.

PDF Datasheet