1:2 Fanout Differential Amplifier, 0 dB

SKU:

$ 1,121.25

Item	Description
88000102-4	Cable, triple voltage, with modular plugs, Length in ft.
88000103-4	Cable, triple voltage, with modular plug and pig tail leads, Length in ft.

Product Description
Diagrams
Applications
Specifications
Documents

Applications:

1:2 RF Differential Signal Fanout
Transmission Line Driver
Single-Ended to Differential Signal Conversion
RF Receiver
Pulse Amplifier
General Purpose Wideband Amplifier

Features:

Ready to Use Amplifier with Two Pairs of Differential Outputs
0.5 dB Differential Gain Match Typical @ 10 MHz
Small Signal 3 dB BW to 412 MHz (Preliminary)
Clean Pulse Response
0 dB gain, V_O =V_IN (R_L = 50 Ω), well suited for cascading
±1.5 V, 3.0 V_PP, Maximum Outputs, R_L = 50 Ω
DC Coupled 50 Ω I/Os
±110 mA Supply Current Maximum
1.3H x 2.9W x 2.9L-in. Module includes ±8.5V AC/DC Adapter

Description

The PRL-304ANI-0dB is a 0 dB gain, DC-coupled 1:2 differential output RF splitter amplifier. It converts a single-ended input into two pairs of identical differential outputs. The gain match between any pair of differential outputs is 0.5 dB typical @ 10 MHz, and the small signal bandwidth is 412 MHz typical. Maximum output is ±1.5 V, or 3.0 V_PP into 50 Ω. Each output is 50 Ω back-terminated, and the input has a 50 Ω-to-ground termination. The 0 dB gain, V_O = V_IN (R_L = 50 Ω), allows multiple amplifiers to be cascaded for signal distribution applications.

The PRL-304ANI-0dB has been optimized both for pulse response and for CW response, so that output overshoots and ringing for a fast pulse input are much smaller compared to those from amplifiers designed mainly for CW applications. With a 50 Ω back termination at each output, the amplifier can drive long transmission lines with or without load terminations. For optimum output response all outputs should be terminated into 50 Ω.

The PRL-304ANI-0dB is housed in a 1.3H x 2.9W x 2.9L-in. aluminum enclosure, and four amplifier modules can share a single PRL-760E, 4-output ±9.0 V AC/DC adapter. Besides the I/O and power connections, no other set up or connection is required. The PRL-304ANI-0dB is a part of the PRL family of Mini Modular Instruments (MMIs).

Note: The PRL-304ANI-0dB replaces the discontinued PRL-304NI-0dB. The PRL-304ANI-0dB is functionally equivalent, but with better channel-to-channel isolation. The form factor is longer (2.9" vs 2.2") and the power consumption is approximately 10% higher. The PRL-304NI-0dB is no longer available for sale.

[powr-comments id=fbe6ed66_1487098397] pulseresearchlab

Fig. 1: PRL-304ANI-0dB Top Cover Decal

(0° C ≤ T_A ≤ 35° C)*

Symbol	Parameter	Min	Typ	Max	Unit
R_IN	Input Resistance	49.5	50.0	50.5	Ω
R_OUT	Output Resistance	49.5	50.0	50.5	Ω
A_O	Open Circuit Voltage Gain, R_L> 1 MΩ		2
A_L	Loaded Voltage Gain, R_L = 50 Ω		1
A_dB	Voltage Gain in dB		0		dB
ΔV	Differential Gain Match @ 10 MHz, 1 V_PP Sinewave Input		0.5		dB
I_DC1	Quiescent DC Input Current V_IN = 0 V		±50	±60	mA
I_DC2	DC Input Current @ 100MHz, V_O = ±1.5 V into 50 Ω		±125	±135	mA
V_DC	DC Input Voltage	±7.5	±8.5	±12.0	V
V_AC1	AC/DC Adapter Input Voltage, switched to “120 V”	103	115	127	V
V_AC2	AC/DC Adapter Input Voltage, switched to “230 V”	206	230	254	V
t_PLH	Propagation Delay to output ↑		1.8		ns
t_PHL	Propagation Delay to output ↓		1.8		ns
t_r1/t_f1	Small Signal Rise/Fall Times (V_O = ±200 mV)		850	1000	ps
BW1	Small Signal 3 dB Bandwidth	350	412		MHz
t_r2/t_f2	Large Signal Rise/Fall Times (V_O = ±1.25 V)		1.25	1.50	ns
BW2	Large Signal 3 dB Bandwidth	233	280		MHz
t_SKEW	Skew between any two outputs @ 25 MHz		100	250	ps
V_{IN MAX DC}	Maximum Input, DC Coupled	-2.0	±2.0	2.0	V
V_{IN MAX AC}	Maximum Input, AC Coupled	3.8	4.0	4.0	V_PP
V_{O MAX}	V_O maximum, all outputs terminated into 50 Ω	3.0	4.0	4.2	V_PP
	Size	1.3 x 2.9 x 2.9			in
	Weight, w/o AC adapter	5			Oz
	Shipping weight, w/AC adapter	4			lb

*Unless otherwise specified, dynamic measurements are made with all outputs terminated into 50 Ω.

PDF Datasheet