Applications:
|
|
Features:
|
|
DescriptionThe PRL‑175A‑10 is a battery operated, pocket-sized lab tool and troubleshooting aid. It outputs a 0 V/5V DC or 10 MHz Xtal controlled square wave signal into a Hi Z load, or 2.5V into 50 Ω. These are the essential signals for troubleshooting TTL circuits, equipment, and systems. The PRL‑175A‑10 has a 50 Ω back-terminated output driver that can drive a 100 ft long line with or without load termination. It is an indispensible tool for engineers and technicians working in the field, in the lab or on the production floor. The included 9 V battery pack can power the PRL‑175A‑10 in square wave mode into a 50 Ω load continuously for up to 10 hours, or for 25 hours into a 600 Ω load*. An optional 4‑AA battery pack or a +9V AC adapter is also available. The output logic mode, VOH, VOL or 10 MHz square wave, is selected by a 3-position toggle switch, and the status is indicated by an LED. The PRL‑175A‑10 module can be attached to the battery pack using a short strip of 3M Dual-Lock Fastener (included) and powered via a short cable terminated into a 2.1 mm DC jack. The battery pack also includes an On/Off switch, as shown in the photo above. The assembled unit fits easily into a pocket. Applications of the PRL‑175A‑10 include precision, low-jitter clock source for testing digital systems, ADCs and amplifiers, and for simple troubleshooting applications. The PRL‑175A‑10 is housed in a 1 x 1.3 x 2.2-in. extruded aluminum enclosure and includes a 0.83H x 1.3W x 2.7L-in. battery pack. * Run times are typical, and will vary depending on usage profile and environmental conditions. |
(0° C ≤ TA ≤ 35° C)*
| Symbol | Parameter | Min | Typ | Max | Unit | Comments |
|---|---|---|---|---|---|---|
| IDC1 | DC Input Current | 10 | mA | RL = 1 MΩ | ||
| IDC2 | DC Input Current | 60 | mA | VO = Hi, RL = 50 Ω | ||
| IDC3 | DC Input Current | 37 | 40 | mA | VO = 10MHz, RL = 50Ω | |
| VDC | DC Input Voltage | 5.65 | 6 | 12 | V | |
| VAC | AC/DC Adapter Input Voltage | 103 | 120 | 132 | V | |
| VOL1 DC | Lo Level DC Out | 0 | 0.2 | V | RL = 1 MΩ | |
| VOL2 DC | Lo Level DC Out | 0 | 0.1 | V | RL = 50 Ω | |
| VOH1 DC | Hi Level DC Out | 4.8 | 5.0 | V | RL = 1 MΩ | |
| VOH2 DC | Hi Level DC Out | 2.4 | 2.5 | V | RL = 50 Ω | |
| VOL1 10 MHz | Lo Level 10MHz Out | 0 | 0.2 | V | RL = 1 MΩ | |
| VOL2 10 MHz | Lo Level 10MHz Out | 0 | 0.1 | V | RL = 50 Ω | |
| VOH1 10 MHz | Hi Level 10MHz Out | 4.8 | 5.0 | V | RL = 1 MΩ | |
| VOH2 10 MHz | Hi Level 10MHz Out | 2.4 | 2.5 | V | RL = 50 Ω | |
| tR/tF | Rise/Fall Times (10% - 90%) | 1.8/1.4 | 2.5 | ns | RL = 50 Ω | |
| f | Xtal Frequency | 10 | MHz | |||
| Δf | Frequency Stability, 20°C ≤ TA ≤ 35 °C | ±25 | ppm | |||
| Frequency Jitter peak to peak | 20 | ps | ||||
| Single 9 V Alkaline Battery | 9 | V | 9 V Battery Pack | |||
| Battery life under continuous operation* | 10 | hr | VO = 10 MHz, RL = 50 Ω | |||
| Battery life under continuous operation | 25 | hr | VO = 10 MHz, RL = 600 Ω | |||
| Size | 1.0H x 1.3W x 2.7L | In. | Battery Pack | |||
| Weight | 3 | Oz | Battery Pack | |||
| Size | 1.0H x 1.3W x 2.2L | in. | PRL-175A | |||
| Weight | 2 | Oz | PRL-175A | |||
