2-Phase Programmable NECL Frequency Divider (f/1 - f/16)

Applications:

• System Clock Simulation
• Low Jitter NECL Clock Source
• SONET Clock Generator
• Laser Pump Synchronization
• Scope triggering
• PRBS/BERT synchronization
• Optimizing outputs from frequency synthesizers
• Testing high-speed serial/SERDES links (GB Ethernet, eSATA, PCIe, HT, etc)
• An Essential Lab Tool for Working with NECL Circuits

Features:

• 2+ GHz typical maximum External Clock Input frequency
• f/1 - f/16 outputs with independent 2φ outputs
• φ1 output = f/1, 2, 4 or 8
• φ2 output = f/2, 4, 8 or 16
• Both φ1 and φ2 have two pairs of complementary NECL outputs
• Square wave outputs (except f/1)
• Internal 50 Ω/-2V Input Terminations also accept AC-coupled PECL or sinewave signals
• 10 ps typical Edge Jitter
• 40 ps typical skew between f/n & f/n NECL outputs (each phase)
• Complementary DC coupled NECL Outputs drive 50 Ω loads terminated to -2 V, AC coupled or floating 50 Ω loads
• SMA I/O Connectors
• Ready-to-Use 1.3 x 2.9 x 2.9-in. Module includes a ±8.5V AC/DC Adapter

Description

The PRL-256N is a NECL input, manually programmable, two-phase frequency divider with four pairs of complementary NECL outputs, capable of running at input frequencies in excess of 2 GHz. The input selector switch selects either single-ended or differential inputs. In the differential input mode, both inputs CLK and CLK are terminated internally into 50 Ω/V_TT, where V_TT is equal to -2 V for NECL, and therefore, either one or both inputs can accept AC coupled signals as well. In the single input mode, input signals should be connected to the CLK input only. The CLK input is internally switched to V_BB, nominally -1.3 V for NECL, and input resistor R_T for the CLK input channel is changed to 62 Ω.

The input buffer is followed by two banks of independent manually programmable dividers, Φ1and Φ2. The input is divided by 1, 2, 4, or 8 for the Φ1 bank via D0 and D1 of a two-bit DIP switch. It is divided by 2, 4, 8 or 16 for the Φ2 bank via D2 and D3 of a second two-bit DIP switch. Each bank has two pairs of complementary outputs. All outputs are synchronous with the input frequency and are square waves (50% duty cycle) except for the f/1 outputs, which follow the input.

The outputs are suitable for driving long lines terminated into 50 Ω/-2 V or AC-coupled 50 Ω loads.

The PRL-256N is ideal for applications where a high-frequency divider or pre-scalar is needed for triggering or down-sampling. The two phases of output enable applications requiring two different ratios from a common reference frequency, and the 1:2 fanout feature enables system synchronization and monitoring/triggering applications from a single reference clock source. Applications for the PRL-256N include data acquisition, test, measurement, R&D, and system integration.

The unit includes an AC adapter for ready-to-use convenience on the bench or in a system. All I/O connectors are SMA. The extruded aluminum housing is suitable for mounting with the optional brackets.